supermatter_crystal

Vars
bullet_energy	How much the bullets damage should be multiplied by when it is added to the internal variables
combined_gas	The last air sample's total molar count, will always be above or equal to 0
common_channel	The common channel
countdown	An effect we show to admins and ghosts the percentage of delam we're at
damage	The amount of damage we have currently
damage_archived	The damage we had before this cycle. Used to limit the damage we can take each cycle, and for safe_alert
damage_penalty_point	When we pass this amount of damage we start shooting bolts
dynamic_heat_modifier	Affects the amount of o2 and plasma the sm outputs, along with the heat it makes.
dynamic_heat_resistance	Affects the amount of damage and minimum point at which the sm takes heat damage
emergency_alert	The alert we send when we've reached emergency_point
emergency_point	The point at which we start sending messages to the common channel
engineering_channel	The engineering channel
explosion_point	The point at which we delam
explosion_power	A scaling value that affects the severity of explosions.
final_countdown	Are we exploding?
gas_change_rate	Determines the rate of positve change in gas comp values
gas_comp	The list of gases mapped against their current comp. We use this to calculate different values the supermatter uses, like power or heat resistance. It doesn't perfectly match the air around the sm, instead moving up at a rate determined by gas_change_rate per call. Ranges from 0 to 1
gas_heat	The list of gases mapped against their heat penaltys. We use it to determin molar and heat output
gas_powermix	The list of gases mapped against their powermix ratio
gas_resist	The list of gases mapped against their heat resistance. We use it to moderate heat damage.
gas_trans	The list of gases mapped against their transmit values. We use it to determine the effect different gases have on radiation
gasefficency	The portion of the gasmix we're on that we should remove
gases_we_care_about	The list of gases we will be interacting with in process_atoms()
gasmix_power_ratio	Affects the power gain the sm experiances from heat
gl_uid	The amount of supermatters that have been created this round
hallucination_power	How much hallucination should we produce per unit of power?
has_been_powered	Boolean used for logging if we've been powered
has_reached_emergency	Boolean used for logging if we've passed the emergency point
is_main_engine	Used along with a global var to track if we can give out the sm sliver stealing objective
last_accent_sound	cooldown tracker for accent sounds
lastwarning	Time in 1/10th of seconds since the last sent warning
matter_power	Takes the energy throwing things into the sm generates and slowly turns it into actual power
mole_heat_penalty	Used to increase or lessen the amount of damage the sm takes from heat based on molar counts.
moveable	Can it be moved?
power	Refered to as eer on the moniter. This value effects gas output, heat, damage, and radiation.
power_transmission_bonus	Affects the amount of radiation the sm makes. We multiply this with power to find the rads.
powerloss_dynamic_scaling	Based on co2 percentage, slowly moves between 0 and 1. We use it to calc the powerloss_inhibitor
powerloss_inhibitor	Uses powerloss_dynamic_scaling and combined_gas to lessen the effects of our powerloss functions
produces_gas	Disables the production of gas, and pretty much any handling of it we do.
radio	Our internal radio
radio_key	The key our internal radio uses
safe_alert	Our "Shit is no longer fucked" message. We send it when damage is less then damage_archived
soundloop	Our soundloop
takes_damage	Disables all methods of taking damage
uid	The id of our supermatter
warning_alert	The alert we send when we've reached warning_point
warning_point	The point at which we should start sending messeges about the damage to the engi channels.
zap_cutoff	The cutoff for a bolt jumping, grows with heat, lowers with higher mol count,
zap_icon	Tracks the bolt color we are using

Var Details

var
bullet_energy
–

How much the bullets damage should be multiplied by when it is added to the internal variables

var
combined_gas
–

The last air sample's total molar count, will always be above or equal to 0

var
common_channel
–

The common channel

var
countdown
– /obj/effect/countdown/supermatter

An effect we show to admins and ghosts the percentage of delam we're at

var
damage
–

The amount of damage we have currently

var
damage_archived
–

The damage we had before this cycle. Used to limit the damage we can take each cycle, and for safe_alert

var
damage_penalty_point
–

When we pass this amount of damage we start shooting bolts

var
dynamic_heat_modifier
–

Affects the amount of o2 and plasma the sm outputs, along with the heat it makes.

var
dynamic_heat_resistance
–

Affects the amount of damage and minimum point at which the sm takes heat damage

var
emergency_alert
–

The alert we send when we've reached emergency_point

var
emergency_point
–

The point at which we start sending messages to the common channel

var
engineering_channel
–

The engineering channel

var
explosion_point
–

The point at which we delam

var
explosion_power
–

A scaling value that affects the severity of explosions.

var
final_countdown
–

Are we exploding?

var
gas_change_rate
–

Determines the rate of positve change in gas comp values

var
gas_comp
– /list

The list of gases mapped against their current comp. We use this to calculate different values the supermatter uses, like power or heat resistance. It doesn't perfectly match the air around the sm, instead moving up at a rate determined by gas_change_rate per call. Ranges from 0 to 1

var
gas_heat
– /list

The list of gases mapped against their heat penaltys. We use it to determin molar and heat output

var
gas_powermix
– /list

The list of gases mapped against their powermix ratio

var
gas_resist
– /list

The list of gases mapped against their heat resistance. We use it to moderate heat damage.

var
gas_trans
– /list

The list of gases mapped against their transmit values. We use it to determine the effect different gases have on radiation

var
gasefficency
–

The portion of the gasmix we're on that we should remove

var
gases_we_care_about
– /list

The list of gases we will be interacting with in process_atoms()

var
gasmix_power_ratio
–

Affects the power gain the sm experiances from heat

var
gl_uid
– /static

The amount of supermatters that have been created this round

var
hallucination_power
–

How much hallucination should we produce per unit of power?

var
has_been_powered
–

Boolean used for logging if we've been powered

var
has_reached_emergency
–

Boolean used for logging if we've passed the emergency point

var
is_main_engine
–

Used along with a global var to track if we can give out the sm sliver stealing objective

var
last_accent_sound
–

cooldown tracker for accent sounds

var
lastwarning
–

Time in 1/10th of seconds since the last sent warning

var
matter_power
–

Takes the energy throwing things into the sm generates and slowly turns it into actual power

var
mole_heat_penalty
–

Used to increase or lessen the amount of damage the sm takes from heat based on molar counts.

var
moveable
–

Can it be moved?

var
power
–

Refered to as eer on the moniter. This value effects gas output, heat, damage, and radiation.

var
power_transmission_bonus
–

Affects the amount of radiation the sm makes. We multiply this with power to find the rads.

var
powerloss_dynamic_scaling
–

Based on co2 percentage, slowly moves between 0 and 1. We use it to calc the powerloss_inhibitor

var
powerloss_inhibitor
–

Uses powerloss_dynamic_scaling and combined_gas to lessen the effects of our powerloss functions

var
produces_gas
–

Disables the production of gas, and pretty much any handling of it we do.

var
radio
– /obj/item/radio

Our internal radio

var
radio_key
–

The key our internal radio uses

var
safe_alert
–

Our "Shit is no longer fucked" message. We send it when damage is less then damage_archived

var
soundloop
– /datum/looping_sound/supermatter

Our soundloop

var
takes_damage
–

Disables all methods of taking damage

var
uid
–

The id of our supermatter

var
warning_alert
–

The alert we send when we've reached warning_point

var
warning_point
–

The point at which we should start sending messeges about the damage to the engi channels.

var
zap_cutoff
–

The cutoff for a bolt jumping, grows with heat, lowers with higher mol count,

var
zap_icon
–

Tracks the bolt color we are using

supermatter crystal /obj/machinery/power/supermatter_crystal

Vars

Var Details

var bullet_energy –

var combined_gas –

var common_channel –

var countdown – /obj/effect/countdown/supermatter

var damage –

var damage_archived –

var damage_penalty_point –

var dynamic_heat_modifier –

var dynamic_heat_resistance –

var emergency_alert –

var emergency_point –

var engineering_channel –

var explosion_point –

var explosion_power –

var final_countdown –

var gas_change_rate –

var gas_comp – /list

var gas_heat – /list

var gas_powermix – /list

var gas_resist – /list

var gas_trans – /list

var gasefficency –

var gases_we_care_about – /list

var gasmix_power_ratio –

var gl_uid – /static

var hallucination_power –

var has_been_powered –

var has_reached_emergency –

var is_main_engine –

var last_accent_sound –

var lastwarning –

var matter_power –

var mole_heat_penalty –

var moveable –

var power –

var power_transmission_bonus –

var powerloss_dynamic_scaling –

var powerloss_inhibitor –

var produces_gas –

var radio – /obj/item/radio

var radio_key –

var safe_alert –

var soundloop – /datum/looping_sound/supermatter

var takes_damage –

var uid –

var warning_alert –

var warning_point –

var zap_cutoff –

var zap_icon –