NOTE: IF YOU UPDATE THE REAGENT-SYSTEM, ALSO UPDATE THIS README.
Structure: /////////////////// //////////////////////////
// Mob or object // -------> // Reagents var (datum) // Is a reference to the datum that holds the reagents.
/////////////////// //////////////////////////
| |
The object that holds everything. V
reagent_list var (list) A List of datums, each datum is a reagent.
| | |
V V V
reagents (datums) Reagents. I.e. Water , cryoxadone or mercury.
Random important notes:
An objects on_reagent_change will be called every time the objects reagents change. Useful if you want to update the objects icon etc.
About the Holder:
The holder (reagents datum) is the datum that holds a list of all reagents currently in the object.It also has all the procs needed to manipulate reagents
remove_any(var/amount)
This proc removes reagents from the holder until the passed amount
is matched. It'll try to remove some of ALL reagents contained.
remove_all(var/amount)
This proc removes reagents from the holder equally.
trans_to(var/obj/target, var/amount)
This proc equally transfers the contents of the holder to another
objects holder. You need to pass it the object (not the holder) you want
to transfer to and the amount you want to transfer. Its return value is the
actual amount transfered (if one of the objects is full/empty)
trans_id_to(var/obj/target, var/reagent, var/amount)
Same as above but only for a specific reagent in the reagent list.
If the specified amount is greater than what is available, it will use
the amount of the reagent that is available. If no reagent exists, returns null.
metabolize(var/mob/living/carbon/C)
This proc is called by the mobs life proc. It simply calls on_mob_life for
all contained reagents. You shouldnt have to use this one directly.
handle_reactions()
This proc check all recipes and, on a match, uses them.
It will also call the recipe's on_reaction proc (for explosions or w/e).
Currently, this proc is automatically called by trans_to.
isolate_reagent(var/reagent)
Pass it a reagent id and it will remove all reagents but that one.
It's that simple.
del_reagent(var/reagent)
Completely remove the reagent with the matching id.
reaction_fire(exposed_temp)
Simply calls the reaction_fire procs of all contained reagents.
update_total()
This one simply updates the total volume of the holder.
(the volume of all reagents added together)
clear_reagents()
This proc removes ALL reagents from the holder.
reaction(var/atom/A, var/method=TOUCH, var/volume_modifier=0)
This proc calls the appropriate reaction procs of the reagents.
I.e. if A is an object, it will call the reagents expose_obj
proc. The method var is used for reaction on mobs. It simply tells
us if the mob TOUCHed the reagent, if it INGESTed the reagent, if the reagent
was VAPORIZEd on them, if the reagent was INJECTed, or transfered via a PATCH to them.
Since the volume can be checked in a reagents proc, you might want to
use the volume_modifier var to modifiy the passed value without actually
changing the volume of the reagents.
If you're not sure if you need to use this the answer is very most likely 'No'.
You'll want to use this proc whenever an atom first comes in
contact with the reagents of a holder. (in the 'splash' part of a beaker i.e.)
More on the reaction in the reagent part of this readme.
add_reagent(var/reagent, var/amount, var/data)
Attempts to add X of the matching reagent to the holder.
You wont use this much. Mostly in new procs for pre-filled
objects.
remove_reagent(var/reagent, var/amount)
The exact opposite of the add_reagent proc.
has_reagent(var/reagent, var/amount)
Returns 1 if the holder contains this reagent.
Or 0 if not.
If you pass it an amount it will additionally check
if the amount is matched. This is optional.
get_reagent_amount(var/reagent)
Returns the amount of the matching reagent inside the
holder. Returns 0 if the reagent is missing.
Important variables:
total_volume
This variable contains the total volume of all reagents in this holder.
reagent_list
This is a list of all contained reagents. More specifically, references
to the reagent datums.
maximum_volume
This is the maximum volume of the holder.
my_atom
This is the atom the holder is 'in'. Useful if you need to find the location.
(i.e. for explosions)
About Reagents:
Reagents are all the things you can mix and fille in bottles etc. This can be anything from rejuvs over water to ... iron. Each reagent also has a few procs - i'll explain those below.
expose_mob(var/mob/living/L, var/method=TOUCH)
This is called by the holder's reation proc.
This version is only called when the reagent
reacts with a mob. The method var can be either
TOUCH or INGEST. You'll want to put stuff like
acid-facemelting in here.
expose_obj(var/obj/O)
This is called by the holder's reation proc.
This version is called when the reagents reacts
with an object. You'll want to put stuff like
object melting in here ... or something. i dunno.
expose_turf(var/turf/T)
This is called by the holder's reation proc.
This version is called when the reagents reacts
with a turf. You'll want to put stuff like extra
slippery floors for lube or something in here.
on_mob_life(var/mob/living/L)
This proc is called everytime the mobs life proc executes.
This is the place where you put damage for toxins ,
drowsyness for sleep toxins etc etc.
You'll want to call the parents proc by using ..() .
If you dont, the chemical will stay in the mob forever -
unless you write your own piece of code to slowly remove it.
(Should be pretty easy, 1 line of code)
Important variables:
holder
This variable contains a reference to the holder the chemical is 'in'
volume
This is the volume of the reagent.
id
The id of the reagent
name
The name of the reagent.
data
This var can be used for whatever the fuck you want. I used it for the sleep
toxins to make them work slowly instead of instantly. You could also use this
for DNA in a blood reagent or ... well whatever you want.
color
This is a hexadecimal color that represents the reagent outside of containers,
you define it as "#RRGGBB", or, red green blue. You can also define it using the
rgb() proc, which returns a hexadecimal value too. The color is black by default.
A good website for color calculations: http://www.psyclops.com/tools/rgb/
About Recipes:
Recipes are simple datums that contain a list of required reagents and a result. They also have a proc that is called when the recipe is matched.
on_reaction(var/datum/reagents/holder, var/created_volume)
This proc is called when the recipe is matched.
You'll want to add explosions etc here.
To find the location you'll have to do something
like get_turf(holder.my_atom)
name & id
Should be pretty obvious.
results
This var contains a list of the id(s) of the resulting reagents and their result amounts.
I recommend you set this to the total volume of all required reagent.
required_reagents
This is a list of ids of the required reagents.
Each id also needs an associated value that gives us the minimum required amount
of that reagent. The handle_reaction proc can detect mutiples of the same recipes
so for most cases you want to set the required amount to 1.
required_catalysts
This is a list of the ids of the required catalysts.
Functionally similar to required_reagents, it is a list of reagents that are required
for the reaction. However, unlike required_reagents, catalysts are NOT consumed.
They mearly have to be present in the container.
required_container
The container the recipe has to take place in in order to happen. Leave this blank/null
if you want the reaction to happen anywhere.
required_other
Basically like a reagent's data variable. You can set extra requirements for a
reaction with this.
required_temp
This is the required temperature.
By default, all atom have a reagents var - but its empty. if you want to use an object for the chem. system you'll need to add something like this in its new proc:
var/datum/reagents/R = new/datum/reagents(100) <<<<< create a new datum , 100 is the maximum_volume of the new holder datum.
reagents = R <<<<< assign the new datum to the objects reagents var
R.my_atom = src <<<<< set the holders my_atom to src so that we know where we are.
This can also be done by calling a convenience proc:
atom/proc/create_reagents(var/max_volume)
Other important stuff:
amount_per_transfer_from_this var
This var is mostly used by beakers and bottles.
It simply tells us how much to transfer when
'pouring' our reagents into something else.
atom/proc/is_open_container()
Checks atom/var/reagents.flags & OPENCONTAINER.
If this returns 1 , you can use syringes, beakers etc
to manipulate the contents of this object.
If it's 0, you'll need to write your own custom reagent
transfer code since you will not be able to use the standard
tools to manipulate it.
atom/proc/is_injectable(mob/user, allowmobs = TRUE)
Checks if something can be injected to.
If this returns 1, you can use syringes and droppers
to draw from and add to the contents of this object.
atom/proc/is_drawable(mob/user)
Checks if something can be drawn from.
If this returns 1, you can use syringes and droppers
to draw from the contents of this object.
GOON CHEMS README:
Credit goes to Cogwerks, and all the other goonstation coders for the original idea and implementation of this over at goonstation.
- THE REQUESTED DON'T PORT LIST: IF YOU PORT THESE THE GOONS WILL MURDER US IN OUR SLEEP SO PLEASE DON'T KTHX - Iamgoofball
- Any of the Secret Chems
- Goon in-joke chems (Eg. Cat Drugs, Hairgrownium)
- Liquid Electricity
- Rajajajah
| 